You have no plastic in your truck

Product was successfully added to your shopping cart.

Quick Overview

Injection molding flame retardant ABS that is black in color

Availability: In stock

ResMart ABS VH-0800 BLK is available for purchase in increments of 1500

To view pricing and availability


The ABS three monomer system can be tailored to yield a good balance of properties. Basically, styrene contributes ease of processing characteristics, acrylonitrile imparts chemical resistance and increased surface hardness, and the butadiene contributes impact strength and overall toughness.

ABS is considered the best of the styrenic family. It is hard, tough and rigid.

Glass-reinforced ABS has improved properties over the non-reinforced resin. This advantage opens a wide range of high performance opportunities, particularly in applications requiring high strengths, rigidity and dimensional stability.

ABS is severely attacked by some solvents. Prolonged exposure to aromatic solvents, ketones and esters should be avoided. This poor resistance to solvents does allow solvent bonding as a means of assembly.


  • Dimensional stability
  • Toughness — even at low temperatures
  • Chemical resistance


  • Poor weatherability
  • Poor solvent resistance
  • High smoke generation when burned
For the yellow card listing please refer to listing E115797

Additional Information

Data Sheet
ResMart Grade Premium Branded
FDA Compliant No
RoHS Compliant Yes
ASTM D792   Specific Gravity 1.17
ASTM D1238 Melt Flow Rate 6.0 g/10 min
ASTM D638   Tensile Strength 6,000 psi
ASTM D790   Flexural Modulus 310,000 psi
ASTM D790   Flexural Strength 8,850 psi
ASTM D256   Notched Izod Impact 0.125” 4.2 ft-lbs/in
ASTM D648   HDT (264 psi) 158 °F
ASTM  D785  Rockwell Hardness 107
UL 94   Flame Rating V-0 @ 1.5mm
SKU F06NA0001
Manufacturer ResMart

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.