CALL US NOW
+1-844-738-8806
Cart0Item(s)

You have no plastic in your truck

Product was successfully added to your shopping cart.

Quick Overview

Udel® P-1700 is a transparent grade of polysulfone for injection molding applications

Availability: In stock

Udel® P-1700 NT 11 is available for purchase in increments of 55.115

To view pricing and availability

Details

Udel® P-1700 polysulfone (PSU) is a tough, rigid, high-strength thermoplastic suitable for continuous use up to 300 °F (149 °C). It is resistant to oxidation and hydrolysis and withstands prolonged exposure to high temperatures and repeated sterilization. Udel® P-1700 polysulfone is highly resistant to mineral acids, alkali and salt solutions. Resistance to detergents and hydrocarbon oils is good, but the resin may be attacked by polar solvents such as ketones, chlorinated hydrocarbons and aromatic hydrocarbons. These resins are also highly resistant to degradation by gamma or electron beam radiation. Electrical properties of Udel® P-1700 polysulfones are stable over a wide temperature range and after immersion in water or exposure to high humidity. The resins comply with FDA 21 CFR 177.1655 and may be used in articles intended for repeated use in contact with foods. Additionally, they are approved by the NSF, by the Department of Agriculture for contact with meat and poultry and by the 3-A Sanitary Standards of the Dairy Association.

Additional Information

Data Sheet
SDS
ResMart Grade Premium Branded
Color NATURAL
FDA Compliant Yes
RoHS Compliant Yes
ASTM D792   Specific Gravity 1.24
ASTM D1238 Melt Flow Rate 6.5 g/10 min
ASTM D638   Tensile Strength 70.3 MPa
ASTM D638   Tensile Elongation 50 to 100 %
ASTM D790   Flexural Modulus 2690 MPa
ASTM D790   Flexural Strength 106 MPa
ASTM D570   Water Absorption 0.30 %
SKU F90NA0001
Manufacturer Solvay

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.